Description
HD LED Halo
First of all, these universal-size halo rings feature all the benefits of our exclusive HD LED Halo technology,especially relevant being as follows.
– Proprietary durable phosphor coating, to create uniform, solid appearance.
– Extremely bright, high-density LEDs that are visible even in direct sunlight.
– Multi-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes.
– Integrated mounting tabs for easy installation.
Sizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.
Wiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps.
White: Low Power, 50% brightness
Red: High Power, 100% brightness
Amber: Signal
Black: Ground
HD LED Halo
The white and red wires both activate the main color, at different brightness levels. For switchback rings, this is 6000K white. Your order will ship by default with “low priority” drivers, meaning that if both wires are powered, low power will take priority. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. Of course, this is completely optional, and you can just use one of the input wires if you’d like.
The signal wire will output even higher power to the ring, so it cannot be run constantly, or the driver will overheat. It should only be connected to a turn signal. If you’d like amber for a running light, please select the single color amber rings.
For single colors, the same drivers are included, so you can operate the light with low power, high power, and as a turn signal that switches off and back on completely while blinking.
Need help opening up your lights? Be sure to check out this video on how to bake and open up your lights. If you are still not up to doing it yourself then contact one of our authorized installers in your area today.